+86-136-52756687
banner
Electrical Fuse UL
video
Electrical Fuse UL

Electrical Fuse UL

Piece Weight: 246±5g
Carton Dimension: L.274*W.225*H.230mm
Inner Box Dimension: L.225*W.140*H.50mm
Send Inquiry
Product Details ofElectrical Fuse UL

HEV-H-Q/500VDC

Rated Current

5A-800A

Interrupting Capacity

DC20KA/AC50KA

Rated Voltage

500VDC/500VAC

Other Capacity


Certificates

UR,UL(applying)

Flame Retardancy

UL94-V0(Non-flammable)

Protection type

aR

Environmental protection

RoHS, Reach


Packing:

Model: HEV-P-Q-HT3-300A

Carton Label:

image002

Piece Weight: 246±5g

Carton Dimension: L.274*W.225*H.230mm

Inner Box Dimension: L.225*W.140*H.50mm

Net Weight/Carton: 12.3kg

Gross Weight/Carton: 13.5kg

Carton Dimension:14180cm3


Basic Product Information

l Bolt installation Fast Fuse, Dimension and performance conform to GB13539、IEC60269、UL248

l Rated Voltage: AC/DC700V or lowerIEC)、750V(UL)

l Rated Current: 5800A

l Protect grade: aR; Breaking capacity: AC100KA、DC20kA (Time Constant≤15ms )

l Compliance with EU and China RoHS directives. This series of products are round tube Bolt installation Fast Fuse, with small size, fast acting, low I2thigh reliability and other characteristics. Applicable to frequency converter, rectifier, inverter, various types of power supply and other semiconductor equipment, and power battery, electric motor, capacitor, cable and equipment or components short-circuit and back-up protection. This product has good vibration resistance and flame retardant performance. Suitable for vibration environment applications such as rail transit and motor vehicles.

l Especially used for short-circuit protection fuses of pure electric vehicles and hybrid electric vehicles.

l 750V DC fuse specially designed for pure electric vehicles and hybrid electric vehicle power batteries.

l Provide the fuse base specially customized for the harsh environment of the car.

Product anatomy

1


Product Applications

23


Test Equipment

1

4


Production equipment

2

5


Q:  I was going to set up two systems, one with a switch and one with the flash music interface. Can I buy two Add-A-Circuit and set up the systems? Also, what fuse should I use in these cases, the fuses that were there before or something else? Ex. if I attach two tri-chip led strips to one and a few RGB LEDs to the music/flash interface. Thanks.

A:  Yes it would work. It depends on what the product is; a 2 amp would be fine for the tri chip and rgb LEDs.


Q:  I just want to know the answer if i used a higher amp of fuse to motorcycle it will be safe either i put a higher amp fuse..because the standard stock inserted to my fuse box was 10amp of fuse so if i change it to a higher or lower fuse amp what will be happen? my motorcycle battery is 12volts and 3 amp. 

A:  Don't use a fuse higher then what is in there now.


Q:  My fuse in my motorcycle has a stock of 10 amp, and then after a a year the fuse blew up, my motorcycle was a battery operated. it will be safe if i used a higher amp of fuse? example i used an 25amp of fuse if its possible to cause a problem in my motorcycle? 

A:  Are you using an LED product? I wouldn't use anything other then what the manual says to use.



Hot Tags: electrical fuse ul, China, manufacturers, suppliers, factory, Power Fuse Both Fast Acting And Time Delay Fuse, Fuse Blocks and Fuse Holders, Built in Fuse For Multimeter Voltage Meter, Cartridge Current Rating Fuse Link HRC Fuse AC DC, Fuse for Short Circuit Over Current, fuse for cars

Send Inquiry

(0/10)

clearall